Home


Vintage Tools

Infill Planes

Chisels

Measuring Tools

Misc. Tools

Molding Planes

Saws

Stanley Tools

Wooden Planes


New Hand Tools

Power Tools

Books


Ordering
Information

E-mail

About Us

 
Antique Tools at The Best Things
Sign Up for Email Notification of Updates.
Click Here to Sign Up.

Wooden Planes

Explanation of Our Condition Grading System

Frequently Asked Vintage Tool Questions



for British, Canadian, & European Wooden Planes

American Wooden Planes



A & E. Baldwin A & E. Baldwin A & E. Baldwin A & E. Baldwin

WP201026 A & E. Baldwin A British style slide arm plow plane, but American made. It will make a great user, but it is not in the condition that we are known for. A steel plate has been screwed to the face of the fence and the arm wedges are replaced. Otherwise it isn't bad, just dark. Good Sold




Ohio Tool Co Ohio Tool Co Ohio Tool Co Ohio Tool Co

WP20107 Ohio Tool Co An as found #104 toted boxwood plow plane. This plane was well cared for and has no damage to the tote, almost perfect threads, and a nice wedge. Its only real fault is that the body has some of the natural age checks to which boxwood is prone. The boxwood has a dark, rich patina. The skate has light surface rust that should be carefully scraped. The brass trim remains crisp and untouched. A nice honest example for a modest price because of the age checking of the boxwood. G+ Sold


Ohio Tool Co, Columbus

WP2004114 Ohio Tool Co, Columbus A 1 1/4" stair nosing plane in lightly used condition. Nice as found condition. G++ $38






A. H. Morse A. H. Morse

WP200422 A. H. Morse A 1 1/4" wide rabbet plane with a square iron (i.e. not skewed). This maker is recorded in Tom Elliott's book, but with nothing known about him. The plane is early 19th Century. It is in nice as found condition. There are two old tack holes in the sole from an applied fence. One of them has a tack broken off in the hole. This needs to be knocked in deeper, ground, or drilled out, or it will scratch your work. G+ $65


C. Lindenberger C. Lindenberger C. Lindenberger

WP200155 C. Lindenberger Christopher Lindenberger was a sone of the famous Rhode Island planemaker John Lindenberger. He migrated to Columbus Ohio and this plane was probably made in Ohio. The mark is quite a scarce mark and is ranked as a 3 star mark in Tom's book. This plane is in decent as found condition. It is missing the blade and wedge, as well as one of the arm wedges. I am suspicious that the existing arm wedge is replaced, but I can't see why anyone would replace just one wedge when both were missing. The back of the plane bears the dreaded "J.A. Moody" stamp and inventory number. J.A Moody was an early collector, who wrote the book, American Wooden Plow Planes. The edge of the fence is reeded, an unusual but attractive touch. An important plane for a collector of early Ohio tools, that can easily be restored to be quite presentable. G++ $99


Pattern Maker Pattern Maker

WP191253 Pattern Maker's Plane A pattern maker's removable sole plane. It has three soles, but I only have the blade that is in it. Usually these planes had a separate blade to match the radius of each sole. The blade is 1" wide and the plane is 7 inches long, which is really quite small for this type of plane. Fine $65




W. Cooley, Blackstone St. Boston W. Cooley, Blackstone St. Boston

WP160322 W. Cooley, Blackstone St. Boston This is a very rare form by a rare maker. A 1/4" curved dado plane. This plane is not standard length, it is more coachmaker size. As found condition, it is quite crisp, but with a dirty, blotchy patina. This plane needs a careful cleaning. Highly recommended for the advanced collector. G+ $269




S. Cumings S. Cumings S. Cumings S. Cumings

WP160333 S. Cumings A very scarce and superb solid boxwood American slide arm plow plane. This plane is as found, but if you carefully clean it with dry automotive rubbing compound, the original French polish finish will shine like new. You can see that the finish is still intact under the dirty. The screws that hold the skate on are crisp and still show original bluing. Holding the brass plate onto the skate are 4 small screws that have been ground flush. I have never seen this. The brass plate is crisp like new. There is some paint rubbed onto the fence, which of course can be cleaned off. This plane has been in my own collection for some time and I have never seen a better example. For the connoisseur. Fine $495


P. Chapin, Maker, Balto P. Chapin, Maker, Balto

WP150728 P. Chapin, Maker, Balto A massive panel raiser with the trademark Baltimore wedge, that is found on some Baltimore bench planes. This plane has a working width of up to 2 3/4" and the blade is 3 1/4" wide. It is a full original Butcher iron. THe plane is a bit dirty, but shows very little wear and should clean up to better than G+ $299



W.W.

WP200662 W.W. This is a most interesting rabbet plane. It is clearly professionally made, but is only marked "W.W." where I would expect to find the maker's mark. The right side of the plane is curved. Sadly, the blade and the wedge are missing. The body is in lovely as found condition. It is free to the first person who orders it and spends $300 on old tools. Fine $0



H.L. Kendall, Washington, DC

WP150412 H.L. Kendall, Washington, DC A very scarce American meeting rail plane (for making double hung windows) with a rare Washington DC mark. Superb as found condition. This plane has the same owner's mark as WP150350 by J.T. Brown. For the connoisseur. G++ $395




W. Steele, Wheeling W. Steele, Wheeling W. Steele, Wheeling

WP13117 W. Steele, Wheeling A rare American screw arm sash fillester by a Virginia maker, and yes, Wheeling was in Virginia when this plane was made. Steele planes are scarce and American sash fillesters are scarce. A sash fillester by Steele is unique in my experience. It has a boxwood faced fence, but I don't see how the boxwood is held on. It is not done like one would expect with a sliding dovetail. The depth stop is friction fit and is still tight. The plane doesn't look to have seen much user. I would have rated it higher but for small nicks on the arms and one nut. One arm is split at the base, as is common, but it is tight. For the advanced wooden plane collector. G+ $245




for top of American Wooden Planes



British, Canadian, European & Other Wooden Planes



I Cox I Cox I Cox I Cox

WP201067 I Cox A scarce early jointer. It has an original, but worn, round-topped iron by P.Bishop. The iron is down around the top of the wedge. The tote is slightly offset and has a small hand-opening like you expect on early bench planes. It has the earlier I. Cox mark and all of the features point to it being 18th Century. It is 26" long. The surfaces if as found with an old dry surface. The spur is mostly gone from the tote and there is checking at the front and rear. A rare survivor. Good Sold


Unmarked Unmarked Unmarked Unmarked

WP201034 Unmarked This is a most unusual matching pair of compassed dado planes. They are European and made from hornbeam. The sole is solid brass. They appear to be professionally made and are marked on the back, 12 1/2L and 50L. The significance of that I don't know. Both are drilled, presumably for the attachment of a fence. They are in wonderful as found condition. They are from the collection of the great planemaker Robert Baker. I bought them years ago from his son. I wish that I knew more about them. The smaller plane cuts a 1/4" groove and is 4 1/4"long. The larger plane is 5 1/2" long and cuts a 3/8" wide groove. G++ $149


Japanese Plane Japanese Plane Japanese Plane Japanese Plane Japanese Plane Japanese Plane

WP200916 Japanese Plane This is a Japanese bench plane that is probably from the 1960s or 70s. I reached out to our contact in Japan to help me identify it, and this was his response "The plane in question seems to be a brand of a wholesaler instead of blacksmith’s brand, and we do not know exactly who made it. My friendly plane maker says, it may a product by the late Mr. Yamaguch in Miki city. The core blade is of Aogami No.1." It is 11 3/8" long and 3 1/2" wide. The blade is 2 1/2" wide. There are a few scratches in the sole and marks on the rear from being struck with a hammer. The blade also has some mushrooming at the top from being struck. For these reasons it did not make fine. This is a first quality vintage Japanese plane at a very reasonable price. G++ $399


Craftsman Made Craftsman Made

WP130863 Craftsman Made A nicely proportioned squirrel tail miniature compassed rabbet plane. The sole is 13/16" wide and 2 3/4" long. Nice color and surface. This plane has been spuriously marked A. Mathieson & Son, Glasgow, by an unscrupulous English dealer, however no knowledgeable person would mistake this plane for being by Mathieson. I have seen so many of these Mathieson fakes in the last 15 or so years that I wonder how many unsophisticated collectors have been duped by them. This is why one should deal with a reputable dealer. The dealer who is known to have been doing this spurious marking is now deceased, but I don't know what happend to his collection of fake stamps. G+ $49


Illegible Illegible Illegible

WP111117 Illegible This is a usable moving fillester for the buyer on a budget. It is not skewed. It may have started life as a molding plane, as the fence is an old fence off of something else and the sole is added on. All of this is period work. The depth stop is the wooden style early depth stop. It is as found and is priced to sell. G- $29



W. Greenslade, Bristol W. Greenslade, Bristol

WP2004110 W. Greenslade, Bristol A typical British toothing plane in as found condition, ready to use. It still has an original French polish finish, albeit with some tool box rash. The sole has to holes where something must have been attached, but I don't know why. The iron is by W. Outram & Son. A nice honest example at a very reasonable price. G+ $69



I Scofield I Scofield

MP200447 I Scofield A nice as found right hand side rebate. G++ $49






E. Preston E. Preston E. Preston E. Preston

WP190949 E. Preston A superb example of a scarce British plow plane with scales inlaid into the arms. This feature is quite scarce and when it does appear the planes are invariable well used. This plane is quite crisp and the nicest example of its kind that I have seen. The scales are still quite white with clean crsip markings. The brass trim is untouched with crisp original surface. Behind the blade there is a decorative brass inlay, a feature that I have seen a few times on best quality English plows. The skatie has light surface rust but is much cleaner than typcial for plows. One of the two boxwood arm wedges has had its end with the finial cut off. Presumably after the finial broke off they cut off the end to make it look better. I didn't even notice at first. I doubt that you will find a better example of this rare form. G++ $229


Illegible Illegbile Illegbile

WP150645 Illegible This is an interesting 18th Century plane. It looks like a typical English panel raiser of the period, but it never had a built in fence. There are some tack holes in the sole were fences have been applied, but clearly it was made without a fence. The blade is nicely marked, John Green. The makers marks is really blurred but it might be Benton, Leeds. The surface and color on this plane are marvelous and I really like it. G++ $145


W. Sanderson, Stockport W. Sanderson, Stockport

WP130687 W. Sanderson, Stockport An as found bronze plane, with a boxwood wedge, that I believe was made fo the hat making trade. but I am not sure. The blade is about 3/8" wide but it only cuts on half of the blade. Lovely color and really a great piece. It is also marked 258, which could be a serial number or perhaps a model number. G+ $165





Antique Wooden Plane Antique Wooden Plane Antique Wooden Plane

WP110215 Unmarked A lovely fruitwood smoothing plane that I would guess is either south German, Swiss, or Austrian. Very nicely decorated, and with a very pleasing patina. I am not sure of the age, but it could be 18th Century. The iron is marked "FRHA" with a mark that certainly looks like it could be 18th Century. There is some old worming, primarily towards the front. Measures 11 3/8" long. I have had this plane for 20 years, and before that it was in the great Harold Prucha collection. Highly recommended. Good $399



Early Carved Plane Early Carved Plane

100420 Early Carved Plane An beautiful carved European smoothing plane, presumably 18th or possibly early 19th Century. These types of craftsperson made planes are notoriously hard to date, and while I don't think that it would be later, I could believe that it was earlier. This plane has a North Wind figure blowing up at the user as he planes. The plane has a horn in the front, that is carved with a scroll. The plane is hornbeam, the horn is beech, and there is an applied sole that was probably added to compensate for wear, and is maple. This plane has a wonderful patina, and has always been well cared for, but well used. The blade is all but worn out. The wedge is clearly period, but I have no way to tell for sure if is original or not. I would guess that this plane is either German, Swiss, or Austrian, but again this is just an educated guess. Formerly in the Dermot and Cynthia Roche collection, as sold by David Stanley some years ago, this is a museum quality tool. Measures 10 inches overall. G+ $795




Antique Wooden Plane Antique Wooden Plane

WP80428 Unmarked This is a rare matched pair of Scottish door check planes. They have been in my collection for more than 15 years. They are uncleaned and could use a careful waxing. The right side plane is in perfect condition, little used with a full iron. The left side plane is more worn, and the iron is down below the top of the wedge, and the side is split from shrinkage on the blade. It is still perfectly useable and in fact I did use it once years ago. I don't recall ever seeing another pair of these rare planes. They are 4 3/8" long. G+ $179



Irons and Cap Irons (Blades and Chip Breakers)



Unmarked Unmarked

WP201060 Unmarked A nice as found 2 3/16" wide cap iron. G+ $19






Unmarked

Unmarked

WP201063 Unmarked A 2" wide cap-iron that has light oxidation. This is the kind were there is no protruding bolster. It is almost certainly American. G+ $18





Unmarked

WP2004116 Unmarked A nice as found 2" cap iron. It is missing the screw. G++ $9






Gleave & Son, Manchester

WP2004104 Gleave & Son, Manchester A nice as found 2" cap iron. The bolster has been ground down a bit to provide clearance for something. G+ $16





Unmarked

WP200433 Unmarked A 2 1/4" wide cap iron that has been cleaned and has some patches of light pitting. The bolster has been ground down a bit to clear a lever cap. G+ $16





A Mathieson & Son, Glasgow

WP200438 A Mathieson & Son, Glasgow An as found cap-iron measuring just over 2 1/16" wide. The bolster has been ground down a bit. G+ $16






I. Sorby, Punch Brand

WP20044 I. Sorby, Punch Brand A 2 1/4" tapered iron with its original cap iron. About 2" remains one the blade. The pair are covered in light rust but hopefully should clean to better than. Good $29





W. Butcher

WP20047 W. Butcher A 2 7/16" wide iron that is ground for use in a panel raiser. It has 1 1/6" remaining. G+ $15






Illegible

WP20048 Illegible A 2 1/4" wide tapered iron that is ground properly for a jack plane with a gentle curve to the edge. It has 1 7/8" remaining. The working end is OK but the top half of the blade is pitted. Still a great user. Good $19




W. Marples

WP20049 W. Marples A 2" wide tapered iron with 1 1/4" remaining. G+ $12






W. Butcher

WP200410 W. Butcher A tapered iron that masures just over 2 1/4" wide and has 1 1/2" remaining. The upper half is pitted and the lower half has some extremely light surface rust that will polish off without any issues. G+ $19





W. Butcher, Sheffield W. Butcher, Sheffield

WP200143 W. Butcher, Sheffield A 2 5/8" cap iron off of a big bench plane. Some surface rust but untouched and with a nice look. G+ $29






W. Marples

WP191156 W. Marples A 2 1/16" wide tapered iron with 1 3/4" remaining. Nice as found condition. G++ $25






W. Marples & Sons

WP191126 W. Marples & Sons A 2 1/2" cap iron with no screw. Some light rust. G+ $12






W. Butcher

WP190956 W. Butcher A 2 3/8" wide iron that measures 6 1/8" overall and has been ground with a curve, either for a gutter plane or a pattern maker's plane. Nice untouched condition. G++ $16





W. Gilpin

WP19092 W. Gilpin A 2 7/16" wide iron with orignal cap iron. Rusty overall. The blade has 1 3/8" left on it. The cap iron is the early type were a hole was punched into it and then threaded, rather than installing a bolster. The mark is an early mark with a crown over Gilpin. Good $15




Hancock Tool, Extra Steel

WP190125 Hancock Tool, Extra Steel A 2 1/4" tapered iron with its orginal cap iron. This is a good cap-iron for an infill plane because it doesn't have a bolster to interfere with the lever cap. This iron has 1 5/16" remaining. As found with light surface oxidation. G+ $29




Providence Tool Co.

WP181214 Providence Tool Co. A 2 1/8" wide tapered iron with its original cap iron. It has decorative semi-circles cut into the upper corners, an attractive touch often seen on Americna irons of the period. The cap iron has matching cuts. There is 1 5/8" left to the hole. The edge has light chips and will need grinding before you use it. Nice honest condition. It is also marked Extra, which implies that it was a top-of-the-line blade. G+ $49


Sandusky Tool Co

MI180823 Sandusky Tool Co A 2 1/8" tapered iron with a lovely untouched patina. 1 7/8" remains to the hole. There is moderate mushrooming to the top and a bit of rust on the back. G+ $30





Robert Sorby

WP190147 Robert Sorby A nice clean tapered iron that measures a bit under 2 1/4", really 2 7/32". It mics to 175 thousandths of an inch and has 1 3/8" remaining. Minor mushrooming to the top edge. G++ $19





Hearnshaw Brothers

WP190131 Hearnshaw Brothers A 2 1/4" wide iron that is tapered, but only not as much as most. It has a light taper and is still quite thick at the top. It mics to 200 thousandths at the cutting edge and 142 thousandths of an inch at the top. It has 2 1/2" left, which is about full length. The top has some light pitting, but the bottom is bright and while as found, will clean easily. G+ $



To the top of Wooden Planes